Use this form to request safety labels for your laboratory. EHS will send labels via campus mail.
Materials Pick Up Tag for hazardous waste containers
Must be approved for use of biological materials.
Use in areas of the lab where cancer hazards are used and stored.
Use to indicate non-hazardous chemical storage areas.
Use in areas of the lab where corrosive, flammable and toxic gas hazards are used and stored.
Use if an a potential electrical hazard exist, i.e. lab has open circuits or exposure wires as a part of lab work of 600 volts or less. Place on the guard of the device not the lab door.
Use if the lab has at least 1/2 the max allowable quantity=2 x 150lb cylinders or more.
Use in areas of the lab where corrosive, flamable and toxic gas hazards are used and stored.
Use if an a potential electrical hazard exist, i.e. lab has open circuits or exposure wires as a part of lab work of more than 600 volts or more. Place on the guard of the device not the lab door.
Use if lab contains a laser of any class. Class 3B and 4 laser rooms require additional signage and signal lights.
Use if the lab has an NMR or MRI.
Place on or near storage cabinet where oxidizing chemicals are stored.
Must be approved for use of radioactive materials.
Contact EHS Chemical Safety team for approval before selecting.
Place on or near storage cabinet where toxic or poisonous chemicals are stored.
Place on or near areas where UV lights maybe on for prolonged periods for decontamination of disinfection of surfaces.
Place in or near areas were a face guard is mandatory, i.e. liquid N2 pour stations.
Use where safety glasses or eye proctection is mandatory 100% of the time in the lab. Contact EHS Chemical Safety team before selecting.